12 Companies Are Leading The Way In Car Locks Repair
Car Locks Repair
A car locksmith is typically able to work with both electric and manual door locks. Manual lock problems may be more frequent but they can be frustrating.
A good way to prevent this is to apply a lubricant for the door lock during the winter months such as WD-40. It will help to displace moisture and stop it from freezing in the keyhole.
Door Lock Cylinder Replacement
If you've have lost your car keys or suspect that someone else has it, it's a good idea to replace your door lock cylinders as quickly as possible. This will ensure that you're the only person who can open your car, and keep thieves and other unauthorized individuals out of it. Unfortunately replacing a car's door cylinder can be difficult, since it requires at minimum dismantling of the interior door panel in the majority of cases. It's not something majority of people would like to attempt on their own. It could be risky if done incorrectly.
First, the lock cylinder must be removed from the handle. You will need to locate the screw on the end of the lock housing (usually upper right corner). It may be hidden under certain plastic pieces or barely visible. If you are unable to locate it and you're not sure where it is, use a screwdriver remove any trim panels that are blocking your view of the screw. Make use of a screwdriver, a pick Awl, or a small screwdriver to release the lock cylinder tab. Then take the cylinder out of the housing.
After you have the cylinder removed, there are a few things that must be done to prepare it to be used. The keyway needs to be cleaned to get rid of dirt and grease. The cylinder must be lubricated to ensure it does not stick in the lock. The easiest method of doing this is to use brake cleaner, which will both clean and lubricate lock components of the cylinder. After cleaning the cylinder it is possible to remove the 10mm bolt that connects the handle to cylinder housing using an screwdriver.
You can then install the new cylinder and use it with the original key. It is recommended to purchase an cylinder that is the same brand and model as the one you have. This will ensure that it fits correctly and seals securely. Test the door after installation to confirm that the lock is working correctly and is securely closed.
Door Lock Cylinder Repair
The lock cylinder of your car is the part keys go into to unlock or lock the door. If the key is stuck in the lock or you have trouble turning it, it could indicate that the cylinder for your door needs to be replaced.
It's usually near the door handle, but some cars have them hidden behind an aluminum piece. When mobile car lock repair turn the key, the pins in the cylinder align with the cuts on the key head and allow you to move the lock to unlock the car door. If you have a cylinder mounted on a surface remove the faceplate from the door handle. Unscrew any or all setscrews on the cylinder.
After the screw is removed, you can rotate it to take the door off. You must be careful not to loose any screws when you do this, so place them in a bag or secure location so that you can replace them later. Then, take the key and put it in the lock to see whether the tumblers or pins are moving freely or getting stuck. If the cylinder is stumbling or you hear or feel a click, it's time to replace it.

You can buy new cylinders at any auto parts store however, you'll have to know your vehicle's model and make prior to you go shopping. You can also contact an locksmith to replace the door cylinder. They will be able match the new unit to your existing key, so you can continue to use your lock.
The most frequent issue with the cylinder for a car lock is that it won't turn when you try to use your key. This could be due dirt or corrosion that has built up, preventing the cylinder from moving freely. It is simple to fix this problem by lubricating your mechanism. You can apply brake cleaner or white grease to get rid of any rust or grime. This method will only work on a cylinder that is jammed. It won't fix any other issues.
Door Lock Repair
Rust, dirt or other debris can cause a door lock to jam. This can be resolved by spraying WD-40 on the mechanism. This will help to unjam the mechanism and prevent the issue from occurring in the future. If you can't get the lock to turn, try moving the rod upwards and downwards using needle-nose pliers. If this doesn't work, you should call locksmiths to replace the lock.
Another issue with door locks is misalignment. This can make it difficult to use the lock. It is also a security issue because it allows for easier access to the door in a bid to gain entry. A locksmith should be called to fix the issue, but you can usually fix the issue yourself.
Begin by inspecting the lock to determine what is causing it to not function properly. If the issue is due to an incorrectly aligned deadbolt or strike plate, tighten the screws that hold these components. Then, reposition the bolt and strike plate to ensure that they are aligned correctly with the door frame.
A small amount of graphite can be used to solve the issue when the key will not move or turn. You can apply the graphite to the key by either squeezing it out of a tube or dusting it onto an extra key. Insert the key and operate it for a few times to activate the graphite into the mechanism. If this isn't working then you should take off the doorknob and check the spindle. It could be worn out.
The process for removal of a door handle panel is different based on the vehicle, but it is generally the same. Once you have removed the panel, locate all of the set screws that secure the lock cylinder. These are located on the inside of the handle or in the middle of the panel, depending on the model. Unscrew the screws and carefully reposition the cylinder so that it is aligned correctly with the keyway. There is a risk of damaging the components if tightening too tightly the screws.
Door Lock Replacement
Replace your lock if it's worn or looks a little old. It will give you a fresh look. It's a relatively simple process that can be done at home by following just a few steps. Make sure you take the time to examine the deadbolt and latch in order to ensure that your new locks are set correctly.
Begin by taking off the screws that secure the knob's inside plate to the door. Pull the knob and latch out. If the interior plate has no screws and is purely decorative take it off gently using a screwdriver. The plate may be secured by pins or snap off the edge. Once the plate is removed, you can easily take off the dead bolt and latch, and put them away.
Now is the time to put the new lock plates into place. Make sure that the inside and exterior plates are lined up over the deadbolt holes in the jamb of the door and the long spindle of metal from the lock cylinder mechanism going through both holes. After the plates are set, you can thread the screws into the holes to secure the plates in place. If the plate does not have any screwholes then you can simply slide it over the latch.
Use the screws that came with the lock kit you purchased instead of the screws you already have. Use the screws that came in your new lock kit instead. If you don't have the correct size of screws, then visit your hardware or home improvement store and purchase screws that match the rest of your door lock's hardware.
Make sure that the new deadbolt and latch plates are the same length as the original ones, and that they are placed over the latch hole in the door jamb. After everything is in place then push the remaining screws to tighten them up. You can now test the latch and deadbolt with your key. If the key won't turn then it's time to contact a locksmith.